Extremely rugged sensor consisting of a hex head machine screw that can be fastened into drilled and tapped holes.
All thermistor types < 0.200” OD.
Hook-up wire or small diameter shielded / jacketed cable extension leads.
Maximum temp. ratings from 60°C up to 260°C.

Surface temperature sensor for locations where size and space are critical. Housing consists of a cylindrical body, milled wrench flats and a threaded section with an undercut to minor thread diameter for precise positioning of the sensor.
Small to medium thermistor types <0.100” OD.
Hook-up wire extension leads.
Maximum temp. ratings from 60°C up to 260°C.

Description:

Rugged sensor consisting of a machine screw that can be fastened into drilled and tapped holes.

Applications:

Extremely rugged sensor consisting of a hex head machine screw that can be fastened into drilled and tapped holes.

Specifications:

Standard hex head screw material is stainless steel.
Aluminum, brass, titanium and a variety of plastics or other materials are available, consult factory.
Industry standard dimensions will apply for the following:
- Coarse threads: from #4-40 to 1/2-12.
- Fine threads: from #4-48 to 1/2-20.
- Extra fine threads: from #12-32 to 1/2-28.
- Metric threads: from M4x0.7 to M10x1.50.
- “W” = wrench size for hex head.
- “H” = thickness of hex head.
The following dimensions can be specified by the customer. Check with factory for availability.
- “L” = length of screw under hex head.
- “T” = length of threaded portion of housing.
- “B” = overall body length.
Shoulder of screw may be undercut to minor diameter of the threads for o-ring installations.
Lead length “X” : 48 inches (typical).
Lead-wire gauge sizes from #22 to #32 AWG.

Standard housing material is stainless steel.
Aluminum or other materials are available, consult factory.
Industry standard dimensions will apply for the following:
- Coarse threads: from #4-40 to 1/2-12.
- Fine threads: from #4-48 to 1/2-20.
- Extra fine threads: from #12-32 to 1/2-28.
- Metric threads: from M4x0.7 to M10x1.50.
The following dimensions can be specified by the customer.
- Check with factory for availability.
- “L” = length of screw under flange / shoulder.
- “T” = length of threaded portion.
- “B” = overall body length.
- “W” = wrench flat size.
- “S” = thickness of flange / shoulder.
Lead length “X” : 48 inches (typical).
Lead-wire gauge sizes from #22 to #32 AWG.

Competitive Advantage:

Rugged Surface Temperature Sensor Machined Screw Sensors With Extension Leads

Metal Oxide Varistor