Guangdong Uchi Electronics Co.,Ltd
Guangdong Uchi Electronics Co.,Ltd Manufactuer of Varistor, Thermistor, Capacitor,Fuse & Resistor since 2006 !
Add to Cart
High Quality MTC Series Glass Cartridge Fuses 6.3mm x 32mm Rated 3Amp 250V To Avoid Short Circuits And Power Surges
PDF Datasheet Download Link : High Quality MTC Series Glass Cartridge Fuses 6.3...
Description
MTC Series glass cartridge fuses designed to provide current protection for all kinds of electronic equipments such as power supply, UPS,LED lighting etc,to avoid Short Circuits And Power Surges then damage other components on PCB board.It is widespread with cheap cost but good function
.
Features
Wide current range
Customzation available
Short lead time 7-10 days for bulk order , 3 days for samples
Very cheap than other brand such littelfuse
Non-stopped after-services
Cheaper price with bigger quantity
Dimension Unit:mm
Specification
Catalog | Ampere | Voltage | Breaking | I2TMelting |
| MTC0100A/B | 100mA | 250V/125V | 10000A@125 V AC (100mA~10A); | 0.028 |
| MTC0160A/B | 160mA | 250V/125V | 0.075 | |
| MTC0200A/B | 200mA | 250V/125V | 0.12 | |
| MTC0250A/B | 250mA | 250V/125V | 0.15 | |
| MTC0300A/B | 300mA | 250V/125V | 0.19 | |
| MTC0315A/B | 315mA | 250V/125V | 0.22 | |
| MTC0350A/B | 350mA | 250V/125V | 0.29 | |
| MTC0400A/B | 400mA | 250V/125V | 0.28 | |
| MTC0500A/B | 500mA | 250V/125V | 0.52 | |
| MTC0630A/B | 630mA | 250V/125V | 0.87 | |
| MTC0750A/B | 750mA | 250V/125V | 1.1 | |
| MTC0800A/B | 800mA | 250V/125V | 1.4 | |
| MTC1100A/B | 1A | 250V/125V | 3.5 | |
| MTC1125A/B | 1.25A | 250V/125V | 7.6 | |
| MTC1150A/B | 1.5A | 250V/125V | 9.1 | |
| MTC1160A/B | 1.6A | 250V/125V | 13 | |
| MTC1200A/B | 2A | 250V/125V | 20 | |
| MTC1250A/B | 2.5A | 250V/125V | 39 | |
| MTC1300A/B | 3A | 250V/125V | 61 | |
| MTC1315A/B | 3.15A | 250V/125V | 56 | |
| MTC1350A/B | 3.5A | 250V/125V | 70 | |
| MTC1400A/B | 4A | 250V/125V | 104 | |
| MTC1500A/B | 5A | 250V/125V | 148 | |
| MTC1600A/B | 6A | 250V/125V | 173 | |
| MTC1630A/B | 6.3A | 250V/125V | 192 | |
| MTC1800A/B | 8A | 250V/125V | 380 | |
| MTC2100A/B | 10A | 250V/125V | 580 | |
| MTC2120A/B | 12A | 250V/125V | 723 | |
| MTC2150A/B | 15A | 250V/125V | 934 | |
| MTC2200A/B | 20A | 250V/125V | 1280 | |
| MTC2250A/B | 25A | 250V/125V | 1678 | |
| MTC2300A/B | 30A | 250V/125V | 2036 |
Product Characteristics
a. Lead Pull Strength:5N for 10±1 Seconds
b. Lead Thrust Strength: 2N for 10±1 Seconds
c. Solder ability
Wave : 260℃,≤3s;
Soldering Iron: 350±10℃,≤3s.
d. Soldering Heat Resistance
Wave : 260℃,10s;
Soldering Iron: 350℃,5s.
Electrical Characteristics
Test Condition | All electrical test is to be conducted with the ambient air at a temperature of 25±5℃. |
Load capacity | When the fuse loads through 100% of rated current, should blow within 4 hours. |
Interrupting Rating | Breaking Capacity: 10000A at125 V AC (MTC In range 100mA~10A); 35A at 250V AC (MTC In range 100mA~1A); 100A at 250V AC (MTC In range 1.25A~3.5A); 200A at 250V AC (MTC In range 4A~10A). |
Rising Temperature Test | When the 100% times of Ampere Rating passes the fuse, after reaching thermal balance , the temperature on the fuse surface rising shall not be higher than 75℃. Note: Rising temperature = the Surface temperature - Ambient temperature. |
Fusing time
% of Ampere Rating(In) | Blowing Time |
| 100%* In | 4 hours Min |
| 135%* In | 1 hour Max |
| 200%* In | 120 sec Max |
| 1000%* In | 10ms Min |
Average Time Current Curves
Time in second
Current in amperes