Guangdong Uchi Electronics Co.,Ltd
Guangdong Uchi Electronics Co.,Ltd Manufactuer of Varistor, Thermistor, Capacitor,Fuse & Resistor since 2006 !
Add to Cart
120k secondary surge protector SPD
OBV-I25:
| Rated voltage(VDC) | 240/415Vac |
| Iimp(impulse discharge current for class I test) | 120KA |
| In(nominal discharge current for class II test) | 60kA |
| Up(voltage protection level) | ≤1.5kv |
| response time | ≤25ns |
| Signal deterioration indication | off-work；on-replace |
| Housing Material | Red thermoplastic material |
| Housing self-extinguishing class | UL94_V0 |
| Temperature range | -40℃～+80℃ |
| humidity range | 5%～95% |
| Elevational | ≤3000m |
| Method of connecting wire | multiple(Connect In Parallel ) |
| Thread Dimensions | 1.5mm2～35mm2 |
| Mounting method | 35mm standard rail installation |
| IP(degree of protection of enclosure) | IP20 |
Product Features:
combination type SPD
The smallest size single phase surge protector of Iimp: 120KA ；
only 27mm width, save space;
Sealed metal air gap technology,high energy electronic trigger discharge gap, with the ability to block continuous flow
Low output residual；
fast response time (≤100ns);
lower voltage protection level ≤1.5kV
The combination type SPD characteristics:The integrated class 2 surge protector is designed according to IEC and GB standards, using the unique MOV and graphite gap series technology, suitable for 240/415VacTN, TT three-phase system, can withstand 120KA maximum discharge current, usually installed in LPZ0 area and subsequent partitions , It has the advantages of no leakage current, no freewheeling current, low residual voltage, can be monitored, and easy to install. It is widely used in various indoor power protection.