
Add to Cart
Home Electrical Appliances Thermal-link Radial Shape GP C3 115 °C 3 A 250 Vac,Tinned Copper Wire, Total Length 70mm
No. | |||
1 | 2 | 3 | |
Part Name | Case | Sealant | Lead Wire |
Materials | Plastic Case | Sealant Epoxy | Tinned Copper Wire |
Dimension (mm) | |
L |
5.8±0.5 |
W |
5.8±0.5 |
T |
2.3±0.3 |
L1 |
70±2 |
d |
Φ0.54±0.05 |
F |
3.7±0.5 |
Soldering
Soldering should be carried out under the soldering conditions listed in table 2.
Table 2 Soldering Time (s)
Rated Functioning Temp. Tf (℃) | Max. Allowable Soldering Time (s) |
Soldering Temp. (℃) |
Show | ||
Length of Lead Wire (L) | |||||
10 mm | 20 mm | 30 mm | |||
76~101 | 1a | 2 | 3 |
400 |
|
102~115 | 1a | 2 | 3 | ||
116~135 | 1a | 3 | 5 | ||
136-150 | 3 | 5 | 5 | ||
151~221 | 4 | 6 | 7 | ||
Auxiliary heat sink fixture is required to avoid Thermal-link cutting off unexpectedly. |
Mechanical Connection
Riveting
Suitable for the lead wire diameter (d) of TCO ≥1.2 mm .
Choose small resistivity riveting material and be riveted.
A flexible lead or lead with low resistance should be used to rivet the TCO.
Contact resistance should be minimal, Large contact resistance will lead to higher temp., TCO Functioning in advance
Crimping
Suitable for the lead wire of TCO is flat electrode.
Choose small resistivity crimping material and be riveted.
Crimping process, to ensure that the lead will not be reversed, sealing resin will not be destroyed.
Contact resistance should be minimal, Large contact resistance will lead to higher temp., TCO Functioning in advance.
Please see the specification